RonDexy RDBB-150 Pair Of Bass BlockerPassive Martinique

Then, attach the male connectors to the positive and negative leads of the speaker wiring adapter harness. If you prefer not to use the connectors, you can cut them off, trim the speaker wire near the speaker at a convenient location, and splice the Bass Blocker into the positive and negative speaker leads. Make sure to insulate the connections properly. Bass Blockers are not directional, so their orientation on the speaker leads does not matter. However, polarity is crucial: the white wire is positive, and the black wire is negative. Capable of handling up to 50 watts of power. Frequency range blocked: 4 ohms: 0-150 Hz / 8 ohms: 0-75 Hz. Filters out unwanted frequencies sent to the speakers. Encased in heat shrink tubing with wire leads for straightforward installation.