Groove Pulley Wheel For Rope Wall Mounted U/V/H Silent Cable Pulley 3 PCS

Installation Procedure 1.Mark the hole location with a pen. 2.Drill 4 holes with a 8 mm drill bit in the wall. 3.Insert the yellow expansion pipes in the holes. 4.Fix the pulley with the self-tapping screws. The stainless steel pulley block can bear up to 441 lbs with the diameter of 1.89 inch, the load capacity will be affected by the different installation angle and installation on a different material plane, such as walls, wood and metal 【Silent Duplex Bearing Design】The groove wheel pulley has two silent and wear-resistant duplex bearing, making the cable pulley run smoothly and stably, which can greatly reduce the friction and the noise of the cable pulley, you can hardly hear the sound when it works 【Wide Application】The Wall Mount Pulley Block has wide range of applications, it can be used for wire rope traction, home gym pulley system as DIY attachment, sliding gate, store lifts, dog gate, inverted track, lifting blocks and other outdoor works First, you just need to mark the hole location with a pen. 【What You Get】You will get 2 packs of V Type Single Wheel Pulley Block with the diameter of 1.89 inch. Also equipped with 8 pcs applicable yellow expansion pipes and 8 pcs corrosion resistant self-tapping screws. All dimensions are measured manually, please allow 1-3 mm differences.