ElecGear Hall Joystick Kit Replacement For DualSense Edge PS5 Controller, 2x Hall Effect Control Stick + 2x Calibration PCB + Desoldering Repair Tools For Analog Stick Thumbsticks – HL-DSE. Free Delivery And Returns On Eligible Orders.

Model: HL-DSE Hall Joysticks Replacement for PlayStation DualSense Edge Controller Calibration PCB with MCU for the finest Centering and Rocking Curve A Copper Heating Plate and Solder Wick help a lot for the Desoldering Reminders: 1. This model works with the Edge edition of PS5 controller alone. Not for normal PS5 edition 2. The operation takes serious soldering skill and devices. [2x Hall Effect Joysticks for DSE] – Hall thumbsticks Replacement for DualSense Edge PS5 controller. With the electromagnetic hall sensors inside, the control stick delivers higher sensitivity and accuracy. No more wear of traditional carbon film resistor, say goodbye to drifting. Made from durable material with excellent rocking structure, it provides smoother movement and longer lifespan [2x Added-on Calibration PCB] – The tiny PCB was designed to stack on the back of main board. The moving signal is input to the high speed MCU. Connect the controller to a PC with a USB cable. You can fine reset the center and trim the curve via a web link. The accurate centering with no drift is essential for FPS aiming Solder Wick, Holes Cleaner and simple PCB holder included. And the operation takes serious soldering skill and devices to desolder the old stick off the PCB. 3. Seriously follow the steps we presented on the installation guide for this kit is novel and tricky